All kids deserve a snuggly spot to call their own. Whether it’s for lounging, movie nights or just curling up with a good book, a pint-sized bean bag chair fits the bill. And while there are many of these available in stores, wouldn’t you rather make one as unique as your child?
Complicated bean bag tutorials can be intimidating with all their sections and circle-ness. But what if I told you that with two pieces of fabric, one zipper and a straight stitch you could have an adorable kids bean bag chair in 30 minutes—would you believe me?
In the following directions, all seam allowances are 5/8″.
1. Cut two fabric pieces to 45″ x 32″. The fabrics can be identical or you can choose coordinating patterns for a two-toned look.
2. Turn right sides together. On the long raw edges, use a zigzag stitch to prevent fraying. Then straight stitch the same edges. Due to the amount of abuse these seams will endure, I highly recommend using a small stitch length for durability.
3. Fold the fabric in half like a hot dog bun, matching up the sewn edges.
4. Starting from the folded side, round one end, removing approximately 6″ of material from the corner.
5. Open the fabric back up, and you should have a nice symmetrical curve on one side. Zigzag the raw edge, and again use your straight stitch to close.
6. Open the remaining unsewn edge. Keeping right sides together, fold in half the opposite way as shown below.
7. Sew your 22″ zipper into the center of this opening. I used an invisible zipper so it would be less noticeable when completed.
8. Finish your zipper installation by closing the zipper edge with a straight stitch on either side.
9. Turn the bean bag chair right side out and fill with beans! This kid-size chair takes exactly one bag of bean bag filling (3.5 cubic feet or 100 liters) to create the perfect plump.
There’s really no easy way to get those static cling-crazy little pellets inside without spilling a few. My best advice is to have two people holding the zipper open and a third person to pour—oh, and have your vacuum on standby!
If this chair doesn’t beckon “come, relax,” I don’t know what does!
Choosing to use two different fabrics means the bean bag chair is reversible too. Just flip it, and you’re rockin’ a whole new vibe—it’s two chairs in one!
Whether you make one for your own child or give it as a gift, I guarantee this kids bean bag chair will become the new favorite snuggle spot.
Keep in mind that bean bag filling pellets are a choking hazard! Because the zipper is accessible, please make these only for kids who are old enough to know better than to eat them.
Editor’s Note: If you have any concerns about your child opening the zipper or you’re making for a young child, consider sewing the bag shut (knowing you will have to rip open the seam if you ever want to refill the “beans” and sew shut again). It is never safe for a child to open the zipper or attempt to climb inside.